Wear safety glasses to protect your eyes from any glass shaken free during the repair.
Remove the two 3. The next two steps demonstrate using the iSclack , a great tool for safely opening the iPhone 5c that we recommend for anyone doing more than one repair on an iPhone 5, 5s, or 5c.
If you aren't using the iSclack, skip to Step 5. Place the bottom of your iPhone in between the suction cups, against the plastic depth gauge. Open the handles to close the jaws of the iSclack. Center the suction cups and press them firmly onto the top and bottom of the iPhone. Hold onto your iPhone securely and close the handle of the iSclack to separate the suction cups, pulling the front panel up from the rear case. The iSclack is designed to safely open your iPhone just enough to separate the pieces, but not enough to damage any cables.
Skip the next three steps and continue on to Step 8. While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the front panel assembly from the rear case. Take your time and apply firm, constant force. The display assembly is a much tighter fit than most devices.
Replacement parts and tools for this repair
With a plastic opening tool, begin to gently pry the rear case down, away from the display assembly, while you pull up with the suction cup. There are several clips attaching the front panel assembly to the rear case, so you may need to use a combination of the suction cup and plastic opening tool to free the front panel assembly. Lift the home button end of the front panel up to gain access to the connectors near the top of the phone. Add a rubber band to keep the display securely in place while you work.
Apple iPhone 5
This prevents undue strain on the display cables. Remove the two 1. Use a spudger or a clean fingernail to gently pry the battery connector up from its socket on the logic board. Be very careful to only pry up on the battery connector itself and not the socket on the logic board. If you pry up on the logic board socket or the board itself, you may destroy the socket or damage nearby components on the board.
Remove the following Phillips screws securing the front panel assembly cable bracket to the logic board:. It is especially important to keep track of your screws in this step for reassembly. Accidentally using the 3. Be careful not to over-tighten the screws. If they don't fit easily when you are securing them, they may be the wrong size—don't force them.
Use a plastic opening tool or a fingernail to disconnect the front-facing camera and sensor cable connector. Be sure to only pry up on the connector, and not on the socket on the logic board. Make sure the battery is disconnected before you disconnect or reconnect the cables in this step. Use a plastic opening tool or a fingernail to disconnect the LCD cable connector.
Double check that the two cables are fully disconnected before removing the display. When reassembling your phone, the LCD cable may pop off its connector. A blank screen, or white lines on the display could be caused by a loose connection. Should this happen, reconnect the cable and power cycle your phone. The best way to power cycle your phone is to disconnect and reconnect the battery.
Use a plastic opening tool to pry the edge of the home button ribbon cable up from the display assembly.
- program de creat ringtone pt iphone?
- etrade app for kindle fire.
- blackberry q10 cases best buy.
- Apple iPhone 5c - Replacing the Home button repair guide - iDoc.
Starting from the left and going right may rip your ribbon cable. The contacts are well adhered to the front panel and should be peeled up first.
iPhone 5c Home Button Replacement - iFixit Repair Guide
If you have trouble sliding the plastic opening tool under the contact points, flip the tool over and gently push against the right side of the contact cable to loosen the adhesive, then try again. If you're installing a new home button ribbon cable, be sure to keep the metal bracket and transfer it to your new ribbon cable during reassembly.
Gently push the top right corner of the home button up away from the front panel. Do not push the home button all the way through; you only need to get a corner free so that you can pry it out with a spudger. This membrane is very thin. If you feel like you are going to tear the button, apply heat and try again. Peel the home button the rest of the way off of the display by prying gently with a spudger. I did not complete this guide. Select a Language: Find the full list of tools and instructions on iFixit.
For any jailbroken iPhone , there are infinitely more options for all of the phones functions. With the availability of so many different apps and tweaks available in the Cydia store, jailbreakers can pretty much render their iPhone's home button obsolete. Here is a list of apps that allow you to change the settings of the buttons on your iPhone and enable new multitask gestures which can replace and replicate the use of the home button.
If you know of another fix for a non-functioning Home button that's not on this list, feel free to give us a shout in the comments below. If it worked for you, it could work for others! If you've got other broken problems on your iPhone, some of our other guides might help you out. See how to fix wallpaper issues , fix Wi-Fi connectivity , fix Passbook problems , fix delayed iMessages , and fix the screens of death. This is the reason why I use the home button on the accessibility panel. I can't imagine doing this by myself. I can't figureout how, but I tried the twist and spin method and it worked, no one has been able to fix the button, it was completely dead and has been for a year!
Thank you. The twist and spin doesn't work for me.. Can I use methylated spirits instead of rubbing alcohol? What if I don't have a home button currently, the phone is stuck erasing itself from too many failed attempts at the password just has the spinning logo in the middle,0 and is non-responsive to being plugged into anything?
Oh, and I'm flat broke. Please tell me theres a way.. You missed one of the most obvious fixes: If your phone is under warranty just take it to the Apple store and they will give you a new phone so take an iTunes backup to your local PC before you head down to the Apple Store. I was in the store for all of about 5 minutes and now have a new phone which has worked perfectly ever since.
iPhone 5c Home Button Replacement
Twist and Spin worked Works again after two years. Recboot will reboot your iPhone into DFU mode since you can't do it manually due to broken home button then you can simply restore it with the IPSW file that you created to resore the device, then you can also jailbreak it and install activator to remap the home button to something else instead of replacing it.
Tried the first step and my home key appears to be responding! Hope its not momentary magic: Thank you Osas Obaiza. The first fix worked for me. These are very helpful tips. Now if I could just get the LED light at the back to stop flashing on and off. You'd be amazed the problems a little dust or stuck headphone switch can cause. I tried Fix No2: Realign Your iPhone's Connector thank you so much for your help!
The "Twist and Spin" technique fixed the broken home button to my little sister's ipod. It worked great! Twist and Spin!! I cannot believe that this actually worked. I've tried SO many things. It's been ages since that home button agreed to work! Um, okay. I have 4s and I just discovered it on my phone. Anyway, none of these were working because my phone was trapped in the iPhone apps overview screens, i. Nothing I could do would bring it to home or allow me to go to settings to turn on assistive touch.
I thought I was screwed. I also tried all the others ones that I could except the alcohol one, and I cleaned out my phone ports of dust as best I could using a needle. I am pretty sure this problem arose due to spilling water over my pocket where my phone was resting upside down.
It is still not fixed, but I am hoping that in a day or two the moisture trapped in their will dry up. It wasn't a ton of water, but it was apparently enough. I have spilled papaya salad juice on it before, and now it permanently has problems with the audio I really should wear an apron or something at work so these spills stop happening. Anyway, I ended up just turning it off again after the first time didn't work, and then it had some weird error when I tried to turn it back on.
So I opted for upgrade and then a few minutes later it came back on. When it came back on, it was on the home screen, so I was able to access settings. That's my hopefully temporary solution. I've had this phone three years, so no warranty. But maybe I'll get an upgrade this year since I'm starting to feel behind the times. It's just annoying that Verizon will only give me an upgrade for free if I get on their expensive plan, so not really free I already paid freaking dollars for a 32MB phone. Give me a break. Here's what worked for me: Hold light pressure on the space just left of the home button with one thumb, and then press the Home button with another finger or thumb.
I can actually do this with one thumb by first pressing to the left of the Home button with the tip of my thumb and then rolling my thumb onto the Home button. That actually worked! Except I squeezed the phone next to the Home button on the left. But I am still going to keep the Accessibility feature turned on; thank goodness for that little feature! My techie hubby says it's something to do with losing the physical connectivity of the button over time. Twist and spin worked for me too.
It seems that the twisting either re-seats or re-aligns the button in its enclosure.
Apple iPhone 5c - Replacing the Home button
It also probably wears away any dirt or dust between the button contacts. Whichever, it worked brilliantly for me after about 7 months of utter frustration! All we need now is a remedy to the 'cellphone swipe won't answer calls' problem and I'm home and dry. Thanks for the remedies! The twist and spin worked for a few seconds, but that was it. Several of these articles talk about getting into settings, etc. How can you do that when your Home button doesn't work so you can't bring up that screen? Just did twist and spin on my nieces iPhone 5c and it seemed to work her button never worked its why her aunt gave her the iPhone in the first place and now it works well its a little off still so i think i may replace it any clue what the cost is to have it done.